ISDN-BRICKS

 
 

Enea Netbricks Line of Protocols for TDM and 3G

Enea offers a wide range of highly portable telecom protocol stacks for TDM, 3G, IMS, and NGN networks, as well as fax and data transfer protocols and signal processing and analysis software. All Enea Netbricks protocols stacks are compliant with ITU, ETSI, ANSI, IETF, 3GPP, and many other standards bodies’ specifications.

All of Enea Netbricks protocols are written in ANSI C and take advantage of a modular, portable architecture that allows hardware platform and compiler independence. Enea Netbricks protocols are provided in source code to over 400 network equipment providers (NEPs), and device OEMs worldwide, assisting them in getting products to market quickly, with very low risk and significantly reduced development costs.

  • Portable protocol stacks compliant with protocol standards as published by the key standards bodies around the world (ITU, ETSI, ANSI, IETF, 3GPP).
  • Supplied as source code.
  • Used by over 400 global, industry leading telecommunications equipment manufacturers and OEMs.
  • Backed by over 20 years of protocol development expertise and 40 years of telecom software expertise

Overview

ISDN-BRICKS is a complete implementation of the ISDN signaling protocols features and functionality required to address the ISDN marketplace for voice and data applications. ISDN-BRICKS has been developed to be compliant with existing global standards.

Features/Benefits

  • Worldwide Signaling (25+ variants) including: EuroISDN, VN2, VN3, 1TR6, KDD, NTT, NI-1, NI-2, 4ESS, 5ESS, DMS100, DMS200, TPH.
  • BRI and PRI support (both Network and User sides).
  • High availability multiprocessor configuration supported using ISDN built-in redundancy management.
  • Non-Facilities Associated Signaling (NFAS) and D-Channel Backup.
  • QSIG (both BC and GF) for PBX to PBX communication.
  • ATS QSIG and ARINC variants for Avionics.
  • DPNSS/DASS2 Layer 2
  • DSS1 with features such as AutoSPID and AutoSWITCH (for the US market).
  • Drivers available for a wide range of E1/T1 framers and line interface devices.

Specifications

ISDN-BRICKS is compliant with the following specfications:

  • ITU and ETSI recommendations: Q.921 LAPD, Q.931, Q.2931 B-ISDN, Q.932
  • All QSIG, ETSI and North America Supplementary Services (Q.932)
  • Worldwide Signaling (25+ variants) including: EuroISDN, VN2, VN3, 1TR6, KDD, NTT, NI-1, NI-2, 4ESS, 5ESS, DMS100, DMS200, TPH

For more information see the ISDN-BRICKS Datasheet

Related Products and Services

SIGTRAN-BRICKS
SIGTRAN-BRICKS is a source code implementation of the SIGTRAN protocol suite as defined by the IETF Transport Working Group. The SIGTRAN (SIGnalling TRANsport) is part of the NGN protocols for transporting signaling over IP based networks. It is designed for transporting signaling traffic such as ISDN, SS7 and V5 over an IP network. SIGTRAN is composed of the Stream Control Transmission Protocol (SCTP) and the User Adaption Layers (UA) for each signaling protocol transported over IP. Standardized user adaptation layers includes: IUA, DUA, M2UA, M3UA, SUA, M2PA, V5UA. ISDN User Adaptation (IUA) over IP through the SIGTRAN-BRICKS protocol stack. Please view the SIGTRAN-BRICKS datasheet for more information.

IWF-BRICKS ISDN Interworking Package
Signaling interworking between ISDN and SIP through the IWF-BRICKS ISDN interworking package.

FR-BRICKS
FR-BRICKS is a portable software package which implements the protocols required by access devices (end points) of Frame Relay networks. It implements the frame relay signaling protocols required by access devices (end points) in frame relay networks.

LAP-Bricks
LAP-BRICKS is Enea's implementation of the LAPB, LAPD and LAPF link layer protocols. It is in full compliance with ITU-T Q.921, Q.922 & X.25 recommendations, as well as ISO 7776 and applicable ANSI & ETSI specifications.